#How to use telnet in packet tracer how to
#How to use telnet in packet tracer Pc

Then click Add Simple PDU in the right pane.Īfter clicking ADD Simple PDU, you will see an envelope shape. Open Realtime by clicking the left arrow as you see below. You can also use Realtime to Ping in the PT. When you ping from PC0 to Laptop0, ping will also be successful. Pinging from Laptop0 to PC0 will be successful as follows. Now, to ping from Laptop0 to PC0, execute the ping 192.168.10.10 command on the CMD. To use ping in PT, you must open the properties of the client device and run the command prompt.

#How to use telnet in packet tracer how to

Step 5: How to Test Ping Between Computers Then plug the network cable into the FastEthernet0 interface of the Laptop.Īlso, plug the other end of the cable into an empty port on the Switch.Ĭonfigure the IP settings of Laptop0 as Static as follows. If the port is green, it means that the cable type is correct and working.Īdd one laptop to the network topology and click the wiring option in the same way to connect it to the Switch.

#How to use telnet in packet tracer Pc

Now click Switch0 to connect the PC to the Switch and select any of the free ports listed.Īfter connecting the network cable, the port status color between PC and Switch will be green as in the following image.

Select the FastEthernet0 network card on PC0. To cabling network devices in Packet Tracer, list the cable types that the program supports by clicking 1 and then 2 as shown in the image below.įrom the network cable types, select the straight-through cable type and click PC0. If you want to configure the Switch using commands, you can use the IOS Command Interface.Īfter adding a PC and Switch to the workspace, you must connect these devices with a network cable. In addition, you can delete, save and export Startup-Config and Running-Config files. From here you can change the name and hostname of the Switch in the workspace. You can examine the physical appearance of the Switch in the Properties window.Īfter clicking the Config in the Switch0 properties, you will see some settings related to the device. Once you have added the key to the workspace, click once to open its properties. Drag and drop the relevant Switch model from the workspace to your network. To add a Cisco Switch to the workspace, click (Network Devices) and click Switches from the options listed.Īfter clicking the switches, the device models will be listed in the middle pane. When you execute the ipconfig command on the CMD, you can see the IP settings of PC0. Now, from the PC0 properties, click on Command Prompt.

You do not need to save your settings, because as soon as you click the X button, your settings will be saved. If you do not have a server, you must select Static to manually assign an IP address and configure the IP settings as follows.Ĭonfigure the IP address settings for PC0 as follows. In the IP Configuration window, if you have a DHCP Server in your network topology, simply enable the DHCP option. For example, click to configure the TCP/IP settings of PC0, click the Desktop tab in the window that opens, and then click IP Configuration. You must assign IP addresses, subnet masks, and default gateway addresses to the PCs you add. Step 2: How to Assign IP Addresses to Computers You can also turn the PC on or off from the section shown in the illustration. In this window, you can add modules to the PC from the area on the left, as in the image below. To add a PC, click the section below.ĭrag and drop the device with the desktop view into the workspace in the right section.Īfter adding a PC, you can open the corresponding hardware settings window by double-clicking on it. The simplest and most basic task in Packet Tracer is to add a PC to the workspace.